Placa de evaluación onsemi MicroRB-10035-LP Mounted onto a PCB with Three SMA Connectors - MICRORB-SMA-10035-GEVB, para
- Código RS:
- 185-9632
- Nº ref. fabric.:
- MICRORB-SMA-10035-GEVB
- Fabricante:
- onsemi
Producto Descatalogado
- Código RS:
- 185-9632
- Nº ref. fabric.:
- MICRORB-SMA-10035-GEVB
- Fabricante:
- onsemi
Documentación Técnica
Legislación y Conformidad
- COO (País de Origen):
- IE
Datos del Producto
The MicroFJ-SMA is a printed circuit board (PCB) that can facilitate the evaluation of the J-Series sensors. The board has three female SMA connectors for connecting the bias voltage, the standard output from the anode and the fast output signal. The output signals can be connected directly to a 50W-terminated oscilloscope for viewing. The biasing and output signal tracks are laid out in such a way as to preserve the fast timing characteristics of the sensor. The MicroFJ-SMA is recommended for users who require a plug-and-play set-up to quickly evaluate J-Series TSV sensors with optimum timing performance. The board also allows the standard output from the anode to be observed at the same time as the fast output. The outputs can be connected directly to the oscilloscope or measurement device, but external preamplification may be required to boost the signal.
Especificaciones
Atributo | Valor |
---|---|
Para Usar Con | MICRORB-10035-MLP-TR, MICRORB-10035-MLP-TR1 |
Clasificación del kit | Placa de evaluación |
Nombre del kit | MicroRB-10035-LP Mounted onto a PCB with Three SMA Connectors |