- Código RS:
- 181-0363
- Nº ref. fabric.:
- 8329TFF-25ML
- Fabricante:
- MG Chemical
- Código RS:
- 181-0363
- Nº ref. fabric.:
- 8329TFF-25ML
- Fabricante:
- MG Chemical
Legislación y Conformidad
- COO (País de Origen):
- CA
Datos del Producto
8329TFF is a thermally conductive, fast-cure two-part epoxy adhesive. It is off-white, smooth, thixotropic, and bonds well to a wide variety of substances. It is also flame retardant. For a 1 mL quantity, a minimal service cure can be achieved in 15 minutes at room temperature, and a full cure in 4 hours.
This product is used to bond heat sinks, LEDs and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems.
This product is used to bond heat sinks, LEDs and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems.
Thermal conductivity of 0.8 W/(m·K)
1:1 mix ratio
Working life: 4 minutes
Set time: 15 minutes
Cure time: 4 hours at room temperature or 15 minutes at 65 °C (149 °F)
Flame retardant standard
Provides strong electrical insulation
Low CTE prior Tg
High tensile and compressive strength
Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
Shelf life: ≥3 years
1:1 mix ratio
Working life: 4 minutes
Set time: 15 minutes
Cure time: 4 hours at room temperature or 15 minutes at 65 °C (149 °F)
Flame retardant standard
Provides strong electrical insulation
Low CTE prior Tg
High tensile and compressive strength
Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
Shelf life: ≥3 years
Especificaciones
Atributo | Valor |
---|---|
Tipo de adhesivo | Adhesivo térmico |
Nombre comercial | 8329 TFF |
Aplicación | Gestión térmica |
Compatibilidad del Material | Metal, plástico |
Forma del Producto | Líquido |
Tipo de Paquete | Cartucho doble |
Tamaño del Paquete | 25 ml |
Tiempo de Cura | 4 h |
Medición de Viscosidad | 110000 (Part B) cP/s, 72000 (Part A) cP/s |
Descripción de Viscosidad | Tixotrópico |
Temperatura Máxima de Operación | +150°C |
Rango de Temperatura de Operación | -40 → +150 °C |
Tiempo de configuración | 15min |
Gravedad específica | 1.71 |
Temperatura Mínima de Operación | -40°C |
Enlaces relacionados
- Adhesivo térmico conductivo MG Chemicals 8329 TCS curado en 20 mín
- Aerosol refrigerante MG Chemical hasta -50°C, Aerosol de 200 ml
- Adhesivo térmico térmico MG Chemical 8329 TFS curado en 24 h
- Decapante de revestimiento conformado MG Chemical transparente
- Adhesivo conductivo MG Chemicals 8329TCS curado en 20 mín
- Adhesivo conductivo MG Chemicals 8329TCM curado en 1 h
- Adhesivo epoxi MG Chemical 9200 curado en 48 h
- Adhesivo epoxi epoxi MG Chemical 9200 FR de color Amarillo curado en 24 h