- Código RS:
- 181-0364
- Nº ref. fabric.:
- 8329TFF-50ML
- Fabricante:
- MG Chemical
Temporalmente fuera de stock. El producto se entregará cuando vuelva a estar disponible.
Añadido
Precio Unidad
58,56 €
(exc. IVA)
70,86 €
(inc.IVA)
Unidades | Por unidad |
1 - 14 | 58,56 € |
15 - 39 | 56,20 € |
40 + | 53,86 € |
- Código RS:
- 181-0364
- Nº ref. fabric.:
- 8329TFF-50ML
- Fabricante:
- MG Chemical
Legislación y Conformidad
- COO (País de Origen):
- CA
Datos del Producto
8329TFF is a thermally conductive, fast-cure two-part epoxy adhesive. It is off-white, smooth, thixotropic, and bonds well to a wide variety of substances. It is also flame retardant. For a 1 mL quantity, a minimal service cure can be achieved in 15 minutes at room temperature, and a full cure in 4 hours.
This product is used to bond heat sinks, LEDs and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems.
This product is used to bond heat sinks, LEDs and other heat-generating components in electronic assemblies. It is suitable for use with dual-syringes, mix-tips and automatic dispensing systems.
Thermal conductivity of 0.8 W/(m·K)
1:1 mix ratio
Working life: 4 minutes
Set time: 15 minutes
Cure time: 4 hours at room temperature or 15 minutes at 65 °C (149 °F)
Flame retardant standard
Provides strong electrical insulation
Low CTE prior Tg
High tensile and compressive strength
Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
Shelf life: ≥3 years
1:1 mix ratio
Working life: 4 minutes
Set time: 15 minutes
Cure time: 4 hours at room temperature or 15 minutes at 65 °C (149 °F)
Flame retardant standard
Provides strong electrical insulation
Low CTE prior Tg
High tensile and compressive strength
Strong resistance to humidity, salt water, mild bases, and aliphatic hydrocarbons
Shelf life: ≥3 years
Especificaciones
Atributo | Valor |
---|---|
Nombre comercial | 8329 TFF |
Tipo de adhesivo | Adhesivo térmico |
Aplicación | Gestión térmica |
Compatibilidad del Material | Metal, plástico |
Forma del Producto | Líquido |
Tipo de Paquete | Cartucho doble |
Tamaño del Paquete | 50 ml |
Tiempo de Cura | 4 h |
Medición de Viscosidad | 110000 (Part B) cP/s, 72000 (Part A) cP/s |
Descripción de Viscosidad | Tixotrópico |
Temperatura Máxima de Operación | +150°C |
Rango de Temperatura de Operación | -40 → +150 °C |
Tiempo de configuración | 15min |
Temperatura Mínima de Operación | -40°C |
Gravedad específica | 1.71 |