- Código RS:
- 184-8007
- Nº ref. fabric.:
- BV1HD090FJ-CE2
- Fabricante:
- ROHM
- Código RS:
- 184-8007
- Nº ref. fabric.:
- BV1HD090FJ-CE2
- Fabricante:
- ROHM
Documentación Técnica
Legislación y Conformidad
Datos del Producto
BV1HD090FJ-C is an automotive 1ch high side switch IC, which has built-in overcurrent limiting circuit (OCP), thermal shutdown circuit (TSD), open load detection function (OLD) and under voltage lockout function (UVLO). It is also equipped with the diagnostic output when detecting an error (ST).
Built-in overcurrent limiting circuit (OCP)
Built-in thermal shutdown circuit (TSD)
Built-in open load detection function (at output OFF)
Direct control enabled from CMOS logic IC, etc.
Built-in under voltage lockout function
Built-in Output State Pin
On-Resistance RON=90mΩ (Typ) (VBB=14V, Tj=25°C, IOUT=0.5A)
Monolithic power management IC with the control block (CMOS) and power MOS FET mounted on a single chip
Enables operation at low voltage down to 4.2V
Built-in thermal shutdown circuit (TSD)
Built-in open load detection function (at output OFF)
Direct control enabled from CMOS logic IC, etc.
Built-in under voltage lockout function
Built-in Output State Pin
On-Resistance RON=90mΩ (Typ) (VBB=14V, Tj=25°C, IOUT=0.5A)
Monolithic power management IC with the control block (CMOS) and power MOS FET mounted on a single chip
Enables operation at low voltage down to 4.2V
Especificaciones
Atributo | Valor |
---|---|
Topología de interruptor de alimentación | Lado alto |
Power Switch Type | High Side Switch |
Resistencia de Encendido | 500mΩ |
Número de Canales | 1 |
Tensión de Alimentación Máxima de Funcionamiento | 36 V |
Corriente de Funcionamiento Máxima | 5.5A |
Tipo de Montaje | Montaje superficial |
Tipo de Encapsulado | SOP |
Conteo de Pines | 8 |
Temperatura Máxima de Funcionamiento | +150 °C |
Temperatura de Funcionamiento Mínima | -40 °C |
Dimensiones | 4.9 x 3.9 x 1.37mm |
Serie | IPS Series |
Estándar de automoción | AEC-Q100 |