- Código RS:
- 183-7339
- Nº ref. fabric.:
- EM-269A
- Fabricante:
- Electromen OY
Temporalmente fuera de stock. Disponible a partir del 16/05/2024, con entrega en 4 día(s) laborable(s).
Añadido
Precio Unidad
104,52 €
(exc. IVA)
126,47 €
(inc.IVA)
Unidades | Por unidad |
1 + | 104,52 € |
- Código RS:
- 183-7339
- Nº ref. fabric.:
- EM-269A
- Fabricante:
- Electromen OY
Documentación Técnica
Legislación y Conformidad
- COO (País de Origen):
- FI
Datos del Producto
ELECTROMEN - CONTROLADOR DE MOTOR BLDC EM-269A, 12-35 V DC, 2 A.
EM-269A is brushless DC-motor driver for motors with hall sensor feedback. The unit has a mosfet power stage with good efficiency and it meets also todays EMC requirements. The unit has the basic digital command inputs like direction, start/stop, and analog input for speed control. Device has one NPN output for fault and overcurrent indication use. Indication output functions can be defined with parameter. The fault situations are also indicated with on-board LED.There are two control options for speed. Direct control ( open loop ) sets motor voltage in proportion to control voltage as with a standard DC-motor. Closed loop mode uses hall sensor feedback for speed control. This mode offers good speed regulation. Start and stop ramps are working in both mode. Speed adjust range, closed loop rpm range and ramps can be set with parameters. Analog input is filtered, so that also PWM signal of PLC can be used to control speed.Parameter setting can be done digitally with EM-236 interface unit or with Emen-Tool lite PC-programand EM-268 adapter. There is also an option to use iPhone with Ementool-APP and EM-326 adapter. The Parameters setting are stored into driver's nonvolatile memory .The parameter interfaces can be also used for motor current monitoring.
Características y ventajas
- Salida trifásica
- Ajuste de velocidad
- Límite de corriente y disparo.
- Modos de bucle abierto/cerrado
- Salida de indicación ajustable
- Buena eficiencia
- Emisiones EMC bajas
- Montaje en carril DIN
- 12-24Vdc, 2A continuo, 3A Peak
- Funcionamiento de bucle abierto y cerrado con retroalimentación de sensor Hall
- Velocidad, dirección, limitación de corriente y control de arranque/parada suave
- Compacto y de montaje en carril DIN
Especificaciones
Atributo | Valor |
---|---|
Tensión de Alimentación | 11 → 35 V dc |
Corriente Nominal | 2 A |
Tensión Nominal | 35 V dc |
Enlaces relacionados
- Controlador de motor DC Electromen OY 15 A
- Controlador de motor DC Electromen OY 40 A
- Controlador de motor DC Electromen OY, 30 V dc
- Controlador de motor DC Electromen OY 20 A
- Controlador de motor DC Electromen OY 6 A
- Controlador de motor DC Electromen OY 10 A
- Controlador de motor DC Electromen OY 4 A
- Controlador de motor DC Electromen OY 3 A