- Código RS:
- 213-3379
- Nº ref. fabric.:
- MLPF-WB-01E3
- Fabricante:
- STMicroelectronics
- Código RS:
- 213-3379
- Nº ref. fabric.:
- MLPF-WB-01E3
- Fabricante:
- STMicroelectronics
Documentación Técnica
Legislación y Conformidad
Datos del Producto
The STMicroelectronics MLPF-WB integrates an impedance matching network and harmonics filter. The matching impedance network has been tailored to maximize the RF performance of STM32WB. This device uses STMicroelectronics IPD technology on non-conductive glass substrate which optimizes RF performance. It is 2.4 GHz low pass filter matched to STM32WB55Cx/Rx, STM32WB50Cx, STM32WB35Cx and STM32WB30Cx
Integrated impedance matching to STM32WB55Cx/Rx, STM32WB50Cx, STM32WB35Cx and STM32WB30Cx
LGA footprint compatible
50 Ω nominal impedance on antenna side
Deep rejection harmonics filter
Low insertion loss
Small footprint
Low thickness ≤ 450 μm
High RF performance
RF BOM and area reduction
ECOPACK2 compliant
LGA footprint compatible
50 Ω nominal impedance on antenna side
Deep rejection harmonics filter
Low insertion loss
Small footprint
Low thickness ≤ 450 μm
High RF performance
RF BOM and area reduction
ECOPACK2 compliant
Especificaciones
Atributo | Valor |
---|---|
Máxima Tensión Nominal | 200 V |
Serie | STM32WB |
Frecuencia de Funcionamiento | 2.4GHz |
Enlaces relacionados
- Módulo Bluetooth Low Energy And 802.15.4 Nucleo Pack Based On...
- Placa de evaluación STM32WB Nucleo-64 Boards de...
- Chip simétrico-asimétrico STMicroelectronics BAL-UWB-01E3 Montaje...
- Transceptor RF MLPF-WB55-01E3 6 pines
- Filtro de señal STMicroelectronics Terminación PCB 1.65 x 1.05 x 0.68mm
- Filtro de armónicos ebm-papst 230 V ac con terminales Pestaña,...
- Placa de desarrollo Bluetooth STMicroelectronics STEVAL-FKI001V1,...
- Filtro de señal STMicroelectronics 1.65 x 1.05 x 0.68mm