Inductor de montaje en superficie bobinado KEMET, 180 nH, ±10%, núcleo de Ferrita, apantallado SMD, 79A Idc, Serie TPI
- Código RS:
- 180-9195
- Nº ref. fabric.:
- TPI118082L180N
- Fabricante:
- KEMET
Producto Descatalogado
- Código RS:
- 180-9195
- Nº ref. fabric.:
- TPI118082L180N
- Fabricante:
- KEMET
Documentación Técnica
Legislación y Conformidad
- COO (País de Origen):
- CN
Datos del Producto
The KEMET TPI ferrite core inductors are designed for a very low core loss. Its flat wire, 1 turn through the construction design, enables high efficiency at large currents. The core material used is ideal for high switching frequency applications.
1 Turn coil ferrite
Operating temperature up to +125°C
High switching frequency
Low core loss
Low DCR
High current
Low self-heating
Applications
High-switching DC-DC power supplies
Point of loads (POL)
Servers and storage
Supercomputers
Various decentralized power supplies
Operating temperature up to +125°C
High switching frequency
Low core loss
Low DCR
High current
Low self-heating
Applications
High-switching DC-DC power supplies
Point of loads (POL)
Servers and storage
Supercomputers
Various decentralized power supplies
Especificaciones
Atributo | Valor |
---|---|
Inductancia | 180 nH |
Máxima Corriente DC | 79A |
Encapsulado | 118082 A (4431) |
Longitud | 11.2mm |
Profundidad | 8mm |
Altura | 8.2mm |
Dimensiones | 11.2 x 8 x 8.2mm |
Apantallado | Sí |
Tolerancia | ±10% |
Máxima Resistencia DC | 290µΩ |
Serie | TPI |
Material del Núcleo | Ferrita |
Máxima Temperatura de Funcionamiento | +125°C |
Mínima Temperatura de Funcionamiento | -40°C |
Construcción del inductor | Apantallado |