Adhesivo epoxi ITW Devcon 2 Ton de color transparente, Cartucho doble de 50 ml, curado en 30 a 35 min.
- Código RS:
- 236-8011
- Nº ref. fabric.:
- 14260
- Fabricante:
- ITW Devcon
Producto Descatalogado
Producto Alternativo
Este producto actualmente no se encuentra disponible. Le sugerimos la siguiente alternativa.
- Código RS:
- 236-8011
- Nº ref. fabric.:
- 14260
- Fabricante:
- ITW Devcon
Legislación y Conformidad
Datos del Producto
ITW Devcon Epoxy Resin
The ITW Devcon 50ml epoxy resin is a 2-part structural resin and dispensing systems which allow the metering, mixing and accurate application of epoxy and acrylic structural adhesives. They ensure accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. To apply this adhesive, a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required
each is available separately.
Features and Benefits
• Pot life is 10 minutes
• Cure time is 16 hours
• Setting time is 30 minutes to 35 minutes
• Extremely powerful
• Resistant to water, oil, petrol and chemicals
• Setting time is 30 minutes to 35 minutes
• Shear strength is 15.5MPa
• The operating temperature ranges between -40°C and 93°C
• Cure time is 16 hours
• Setting time is 30 minutes to 35 minutes
• Extremely powerful
• Resistant to water, oil, petrol and chemicals
• Setting time is 30 minutes to 35 minutes
• Shear strength is 15.5MPa
• The operating temperature ranges between -40°C and 93°C
Applications
•
Ceramic
• Concrete
• Ferrite
• Ferrous metal
• Non-ferrous metal
• Glass
• Wood
Ceramic
• Concrete
• Ferrite
• Ferrous metal
• Non-ferrous metal
• Glass
• Wood
Especificaciones
Atributo | Valor |
|---|---|
| Tipo de adhesivo | Adhesivo epoxi |
| Nombre comercial | 2 Ton |
| Aplicación | Adhesivo |
| Compatibilidad del Material | Cerámica, hormigón, ferrita, metal ferroso, vidrio, metal no ferroso, madera |
| Color | Transparente |
| Forma del Producto | Adhesivo |
| Tipo de Paquete | Cartucho doble |
| Tamaño del Paquete | 50 ml |
| Tiempo de Cura | 30 a 35 min. |
| Fuerza de Corte | 15,5 MPa |
| Temperatura Máxima de Operación | +93°C |
| Temperatura Mínima de Operación | -40°C |
| Rango de Temperatura de Operación | -40 → +93 °C |
| Tiempo de configuración | 30 → 35min |