- Código RS:
- 181-1276
- Nº ref. fabric.:
- UR5118RP250G
- Fabricante:
- Electrolube
- Código RS:
- 181-1276
- Nº ref. fabric.:
- UR5118RP250G
- Fabricante:
- Electrolube
Documentación Técnica
- Polyurethane Resin UR5118 (ES - SDS)
- Polyurethane Resin UR5118 (EN - SDS)
- Datasheet
- Contains: Toluene - Restricted to Professional Users
- Contains: Methylenediphenyl diisocyanate (MDI) - Restricted to Professional Users
- As from 24 August 2023 adequate training is required before industrial or professional use
Legislación y Conformidad
- COO (País de Origen):
- GB
Datos del Producto
Electrolube Potting Compound
The Electrolube UR5118 is a high-performance resin system that offers superior protection in a range of harsh environments. It has low moisture sensitivity during cure and its low viscosity allows the resin to flow around complex geometries
Features and Benefits
• Excellent oxidation resistance and very good adhesion to most substrates
• Good electrical properties, used for encapsulating radio frequency transmitter device
• High toughness and tear resistance, maintains flexibility down to -60°C
• Low water absorption, high resistance to sea water, offers enhanced protection under harsh conditions
• Operating temperature ranges between -60°C and 125°C
• Good electrical properties, used for encapsulating radio frequency transmitter device
• High toughness and tear resistance, maintains flexibility down to -60°C
• Low water absorption, high resistance to sea water, offers enhanced protection under harsh conditions
• Operating temperature ranges between -60°C and 125°C
Applications
• Cable jointing
• Coloured and optically clear
• Bespoke and ex stock
• Sealing and protection
• Coloured and optically clear
• Bespoke and ex stock
• Sealing and protection
Especificaciones
Atributo | Valor |
---|---|
Color | Negro |
Tipo de Paquete | Paquete |
Tamaño del Paquete | 250 ml |
Temperatura Mínima de Operación | -60°C |
Temperatura Máxima de Operación | +125°C |
Tiempo de Cura | 36 h |
Composición química | Resina de poliuretano |
Descripción de Viscosidad | Bajo |
Medición de Viscosidad | 150 (Part B) mPa/s, 3390 (Part A) mPa/s |
Rango de Temperatura de Operación | -60 → +125 °C |
Forma física | Líquido |
Enlaces relacionados
- Adhesivo de resina epoxi Electrolube cura 24h
- Adhesivo de resina epoxi negro 3M Scotch-Weld cura 48 h
- Resina de poliuretano Blanco agua Electrolube cura 24 (23 °C) h, 4...
- Resina de poliuretano Crema Electrolube cura 24 (23 °C) h, 4 (60 °C) h
- Resina de poliuretano negro Electrolube cura 24h
- Adhesivo de resina epoxi transparente Electrolube cura 24h
- Adhesivo de resina epoxi Negro paquete de 250 g 24 h, 4 h
- Adhesivo de resina epoxi Negro de Epoxi Electrolube ER2183 cura 24h