Tornillos mecánicos, Acabado Plano, Nylon, Cilíndrico, M3

Documentación Técnica
Legislación y Conformidad
Certificado de conformidad RoHS
COO (País de Origen): US
Datos del Producto

Tornillos mecánicos de cabeza cilíndrica ranurados, rosca métrica: nylon 6.6

RS Pro presenta una gama de tornillos mecánicos de cabeza cilíndrica de calidad superior con una rosca métrica. Las fijaciones completamente roscadas tienen un tipo de accionamiento ranurado para permitir un apriete sencillo con un destornillador de punta plana. Moldeado de nylon 6.6 de color marfil, estos tornillos mecánicos son ideales para aplicaciones que requieren alta resistencia mecánica y excelente resistencia de aislamiento y a la corrosión. Los tornillos mecánicos se pueden acoplar con orificios pretaladrados u orificios pasantes cuando se usan con tuercas de nylon roscadas. Los tornillos mecánicos de Nylon 6.6 de RS Pro están disponibles en una variedad de longitudes y tamaños de rosca para adaptarse a la mayoría de las aplicaciones.

Características y ventajas

• Resistentes y ligeros
• Resistente a vibraciones y abrasión
• Buenas propiedades de aislamiento eléctrico y térmico
• Adecuados para usar en conjuntos de alta tensión
• No magnéticas
• Sin interferencias electromagnéticas

What is a Machine Screw?

A machine screw is similar to a bolt but has a socket or a slot in its head that allows it to be turned by a screwdriver. The shank on a machine screw is straight rather than tapered with a full thread which is uniform along the entire length. Machine screws do not tap their own thread into materials like wood screws do but are designed to be fastened into pre-tapped holes in the parts they are fastening together. Having a threaded hole creates a stronger joint and results in a higher quality product.

¿Dónde se utilizan?

A cheese head type screw literally has a head that looks like a wheel of cheese!. The screw head has a raised cylindrical shape with a flat surface. The design of this screw head type enables the slot to be deeper for increased driving power when used with a flat bladed screwdriver

Features and Benefits of Nylon Screws

Placas de circuito
Maquinaria comercial
Piezas para automoción

¿Por qué utilizar tornillos de nylon?

Machine screws are designed to hold separate components together in a wide range of manufacturing and electronic applications. They are screwed through pre-drilled tapped holes in 2 components and can be fastened at the rear with a nut. Nylon machine screws can be used as fasteners for a wide range of different materials including particle board, metal, wood, rubber and other plastics. Being made of nylon makes these screws ideal for use in devices where weight is a constraint. The excellent electrical insulation properties of nylon also make these machine screws ideal for use in electronics design. Applications include the following:

• Washing machines
• Household appliances
• Handheld devices
• Electronics and circuit boards
• Commercial machinery
• Automotive parts

Los tornillos de nylon están, como se describen, fabricados de nylon. Se suministran en muchas formas y tamaños diferentes, con varios tipos de accionamiento.
Los tornillos de nylon son populares para aplicaciones que requieren las propiedades del nylon, por ejemplo: resistencia ligera a la corrosión, resistencia al óxido y aislamiento eléctrico.

Frequently Asked Questions

What Does M2.5, M3, M3.5, M4, M5 Mean?

Otros tamaños disponibles:

(527-656) M3 x 0,50 - 20 mm
(527-684) M4 x 0,70 - 12 mm
(527-690) M4 x 0,70 - 16 mm
(527-707) M4 x 0,70 - 20 mm
(527-735) M5 x 0,80 - 12 mm
(527-779) M6 x 1,00 - 12 mm
(527-785) M6 x 1,00 - 16 mm
(527-791) M6 x 1,00 - 20 mm
(527-808) M6 x 1,00 - 25 mm
(527-814) M6 x 1,00 - 30 mm
(527-971) M3 x 0,50 - 6 mm
(527-987) M3 x 0,50 - 12 mm
(527-993) M3 x 0,50 - 16 mm

These measurements are found on metric screws, The 'M' stands for Metric. The number after the 'M' is the nominal outer diameter of the screw in mm.

How Do I Cut a Machine Screw?

Damage to the machine screw threads can prevent parts from fitting together properly, therefore care has to be taken when cutting them and the correct tools used.

Cutting a small machine screw (up to standard size #10 or metric size M5 (5mm)
Use a pair of multipurpose wire strippers or electricians pliers that feature M2.5, M3, M3.5, M4, M5 threaded holes. These holes are designed for cutting bolts without damaging the thread. Open the jaws and thread the machine screw into the correct size hole to the distance required. Squeeze the tool handles closed and the screw will be cut at the point where the two halves of the jaws come together. You will have a clean cut without any thread damage.

Cutting a large machine screw (larger than size #10 or metric size M5 (5mm)
This is best done using a hacksaw. Thread the nut on the screw until it reaches the desired point on the head side of the cutting line. Place the screw in a vice or clamp to keep it secure when cutting and cut the screw as straight as you can. When you unthread the nut it will repair and realign any threads that may have been damaged by the saw blade

Atributo Valor
Forma del Cabezal Cilíndrico
Tipo de Accionador Slot
Longitud métrica 12mm
Tamaño de la Rosca Métrica M3
Material Nylon
Acabado Plano
Espaciado de rosca 0.5
23 Entrega en 24 horas
648 Disponible para entrega en 24/48 horas
Precio 1 Bolsa de 100
(exc. IVA)
Por Bolsa
Por unidad*
1 - 4
7,74 €
0,077 €
5 - 9
7,35 €
0,074 €
10 - 29
6,97 €
0,07 €
30 +
6,50 €
0,065 €
*precio indicativo