Interruptor de Botón Pulsador NKK Switches, SPDT, On-(On), 0.4VA, 28V ac/dc, Montaje en orificio pasante
- Código RS:
- 181-7166
- Nº ref. fabric.:
- MB2011SS2G30
- Fabricante:
- NKK Switches
Actualmente no es posible reservar este producto.
Lamentablemente no tenemos stock de este producto y no está disponible para reservar en este momento.
Precio Unidad
8,54 €
(exc. IVA)
10,33 €
(inc.IVA)
Unidades | Por unidad |
1 - 4 | 8,54 € |
5 - 49 | 8,20 € |
50 + | 7,93 € |
- Código RS:
- 181-7166
- Nº ref. fabric.:
- MB2011SS2G30
- Fabricante:
- NKK Switches
Documentación Técnica
Legislación y Conformidad
- COO (País de Origen):
- PH
Datos del Producto
Interlocked actuator block prevents jamming by maintaining correct alignment. Uses an over-center actuator mechanism, which diminishes sparking and increases operating life in AC circuits.
High-torque bushing construction prevents rotation or separation from frame during installation. Stainless-steel frame resists corrosion.
High insulating barriers, formed in the molded diallyl phthalate case, increase isolation of circuits in multi-pole devices.
Patented silver contacts of specially composed alloy for hardness. Prominent external insulating barriers increase insulation resistance and dielectric strength. Longer center solder lug terminal simplifies wiring and soldering.
Epoxy-sealed terminals prevent entry of solder flux and other contaminants. Clinching frame to the case well above the base and terminals provides 1500V dielectric strength.
High-torque bushing construction prevents rotation or separation from frame during installation. Stainless-steel frame resists corrosion.
High insulating barriers, formed in the molded diallyl phthalate case, increase isolation of circuits in multi-pole devices.
Patented silver contacts of specially composed alloy for hardness. Prominent external insulating barriers increase insulation resistance and dielectric strength. Longer center solder lug terminal simplifies wiring and soldering.
Epoxy-sealed terminals prevent entry of solder flux and other contaminants. Clinching frame to the case well above the base and terminals provides 1500V dielectric strength.
Especificaciones
Atributo | Valor |
---|---|
Funcionamiento del Interruptor | On-(On) |
Iluminado | No |
Tipo de Montaje | Montaje en orificio pasante |
Configuración del Contacto | SPDT |
Tensión Nominal | 28V ac/dc |
Valor Nominal del Contacto | 0.4VA |
Material del Contacto | Gold |
Referencia de fabricante | MB2011SS2G30 |
Tensión de contacto nominal ac | 28V |
Tensión de contacto nominal dc | 28V |
Tipo de Terminal | Contacto para PC |
Enlaces relacionados
- Interruptor de Botón Pulsador NKK Switches On-(On) 30 V dc Montaje...
- Interruptor de Botón Pulsador NKK Switches Off-(On) Montaje en...
- Interruptor de Botón Pulsador En Miniatura NKK Switches (On)-(On)...
- Interruptor de Botón Pulsador NKK Switches On-On Montaje en Panel, IP65
- Interruptor de Botón Pulsador NKK Switches SPDT 6 A, Montaje en Panel
- Interruptor de Botón Pulsador NKK Switches On-On Montaje en Panel
- Interruptor de Botón Pulsador NKK Switches On-(On) 28V ac/dc,...
- Interruptor de Botón Pulsador NKK Switches On-(On) 125V ac,...