- Código RS:
- 181-3733
- Nº ref. fabric.:
- CYPD2704-09FNXIT
- Fabricante:
- Infineon
Temporalmente fuera de stock. Disponible a partir del 13/05/2025, con entrega en 4 día(s) laborable(s).
Añadido
Precio unitario (Suministrado en Carretes de 3000)
0,858 €
(exc. IVA)
1,038 €
(inc.IVA)
Unidades | Por unidad | Por Carrete* |
3000 + | 0,858 € | 2.574,00 € |
*precio indicativo |
- Código RS:
- 181-3733
- Nº ref. fabric.:
- CYPD2704-09FNXIT
- Fabricante:
- Infineon
Documentación Técnica
Legislación y Conformidad
Datos del Producto
Type-C Support and USB-PD Support
Supports USB PD3.0 spec and USB Type-C spec version 1.3 (Including support for the revised minimum VCONN operating voltage of 3 V)
Integrated high-voltage protection on CC, VCONN1, and VCONN2 pins to protect against accidental shorts to the VBUS pin on the Type-C connector
40-byte storage programmable over Type-C interface for storing vendor-, device-, and cable-specific configuration data
Termination resistor RA on VCONN1 and VCONN2
Supports RA weakening to reduce power consumption
Supports electronically marked passive cable implementations with one or two controllers Clocks and Oscillators
Integrated oscillator eliminating the need for external clock Power
2.7 V to 5.5 V operation
Sleep: 1.7 mA System-Level ESD Protection
On CC, VCONN1, and VCONN2 pins
± 8 kV Contact Discharge and ±15 kV Air Gap Discharge
Package
9-ball WLCSP
Supports industrial temperature range (-40 °C to +85 °C)
Supports USB PD3.0 spec and USB Type-C spec version 1.3 (Including support for the revised minimum VCONN operating voltage of 3 V)
Integrated high-voltage protection on CC, VCONN1, and VCONN2 pins to protect against accidental shorts to the VBUS pin on the Type-C connector
40-byte storage programmable over Type-C interface for storing vendor-, device-, and cable-specific configuration data
Termination resistor RA on VCONN1 and VCONN2
Supports RA weakening to reduce power consumption
Supports electronically marked passive cable implementations with one or two controllers Clocks and Oscillators
Integrated oscillator eliminating the need for external clock Power
2.7 V to 5.5 V operation
Sleep: 1.7 mA System-Level ESD Protection
On CC, VCONN1, and VCONN2 pins
± 8 kV Contact Discharge and ±15 kV Air Gap Discharge
Package
9-ball WLCSP
Supports industrial temperature range (-40 °C to +85 °C)
Especificaciones
Atributo | Valor |
---|---|
Número de Transceptores | 1 |
Interfaz | Circuito integrado del controlador |
Protocolos Soportados | USB |
Tipo de Fuente de Alimentación | Único |
Protección ESD | Sí |
Tensión de Alimentación Única Típica | de 2,7 a 5,5 V |
Tipo de Montaje | Montaje superficial |
Tipo de Encapsulado | CSP |
Conteo de Pines | 9 |
Dimensiones | 1.35 x 1.37 x 0.27mm |
Altura | 0.27mm |
Longitud | 1.35mm |
Temperatura Máxima de Funcionamiento | +85 °C |
Temperatura de Funcionamiento Mínima | -40 °C |
Ancho | 1.37mm |
Enlaces relacionados
- Controlador USB onsemi FSA4485UCX WLCSP 25 V.
- Controlador USB onsemi FSA4480UCX WLCSP de 25 V
- Controlador USB Infineon CYPD3174-16SXQ SOIC de 25 V
- Controlador USB Infineon CYPD3125-40LQXI QFN USB C71 a 5,5 V
- Controlador USB Infineon CYPD3120-40LQXI QFN 25 V.
- Controlador USB Infineon CY7C65219-40LQXI QFN USB 2.05 V
- Controlador USB Infineon CYPD6125-40LQXIT QFN USB C5 V
- Controlador USB Infineon CY7C65213A-32LTXI QFN USB 2.0 5,5 V