- Código RS:
- 178-4287
- Nº ref. fabric.:
- FUSB303TMX
- Fabricante:
- onsemi
Temporalmente fuera de stock. Disponible a partir del 24/07/2024, con entrega en 4 día(s) laborable(s).
Añadido
Precio unitario (Suministrado en Carretes de 5000)
0,188 €
(exc. IVA)
0,227 €
(inc.IVA)
Unidades | Por unidad | Por Carrete* |
5000 + | 0,188 € | 940,00 € |
*precio indicativo |
- Código RS:
- 178-4287
- Nº ref. fabric.:
- FUSB303TMX
- Fabricante:
- onsemi
Documentación Técnica
Legislación y Conformidad
Datos del Producto
The FUSB303 device is a fully autonomous USB Type−C™ controller optimized for 15 W or less applications. The FUSB303 offers CC logic detection for Source Port role, Sink Port role, DRP, and accessory detection support, as well as Dead Battery support as defined in USB−C specifications. The FUSB303 features configurable address I2C access to support multiple ports per system or it can operate autonomously configured by just pins.
Fully Autonomous USB−C™ Port Controller
Supports Latest Type−C™ Specification Release 1.3
Source, Sink, and DRP Port role Configuration with Optional Accessory Support
Try.SRC and Try.SNK modes for Preferring Source Role or Sink Role Respectively
VDD Operating Range, 2.85 V − 5.5 V
Typical Low Power Operation: ICC < 10μA
GPIO and I2C Configuration
Max 28 V DC Tolerance on ID, VBUS_DET, CC1 and CC2
Dead Battery Support (Sink Port role when No Power Applied)
4 kV HBM ESD Protection for Connector Pins
Supports Latest Type−C™ Specification Release 1.3
Source, Sink, and DRP Port role Configuration with Optional Accessory Support
Try.SRC and Try.SNK modes for Preferring Source Role or Sink Role Respectively
VDD Operating Range, 2.85 V − 5.5 V
Typical Low Power Operation: ICC < 10μA
GPIO and I2C Configuration
Max 28 V DC Tolerance on ID, VBUS_DET, CC1 and CC2
Dead Battery Support (Sink Port role when No Power Applied)
4 kV HBM ESD Protection for Connector Pins
Especificaciones
Atributo | Valor |
---|---|
Power Switch Type | USB |
Tensión de Alimentación Máxima de Funcionamiento | 22 V |
Número de Salidas | 1 |
Tipo de Montaje | Montaje superficial |
Tipo de Encapsulado | QFN |
Conteo de Pines | 12 |
Temperatura Máxima de Funcionamiento | +85 °C |
Temperatura de Funcionamiento Mínima | -40 °C |
Dimensiones | 1.65 x 1.65 x 0.35mm |
Enlaces relacionados
- IC de conmutación USB de potencia Analógico 12 pines
- IC de conmutación USB de potencia FSUSB30MUX 10 pines
- IC de conmutación USB de potencia FUSB303TMX QFN, 12 pines
- IC de conmutación USB de potencia USB 9 pines
- AEC-Q100 IC de conmutación USB de potencia USB 14 pines
- IC de conmutación USB de potencia FUSB307BMPX WQFN, 16 pines
- IC de conmutación USB de potencia USB 10 pines
- IC de conmutación USB de potencia Multiplexor 12 pines