Smart High Side Switch ICs

BV1HD090FJ-C is an automotive 1ch high side switch IC, which has built-in overcurrent limiting circuit (OCP), thermal shutdown circuit (TSD), open load detection function (OLD) and under voltage lockout function (UVLO). It is also equipped with the diagnostic output when detecting an error (ST).

Built-in overcurrent limiting circuit (OCP)
Built-in thermal shutdown circuit (TSD)
Built-in open load detection function (at output OFF)
Direct control enabled from CMOS logic IC, etc.
Built-in under voltage lockout function
Built-in Output State Pin
On-Resistance RON=90mΩ (Typ) (VBB=14V, Tj=25°C, IOUT=0.5A)
Monolithic power management IC with the control block (CMOS) and power MOS FET mounted on a single chip
Enables operation at low voltage down to 4.2V