- Código RS:
- 178-4330
- Nº ref. fabric.:
- NCP1076ABP100G
- Fabricante:
- onsemi
50 Disponible para entrega en 24/48 horas
Añadido
Precio unitario (En un Tubo de 50)
1,67 €
(exc. IVA)
2,02 €
(inc.IVA)
Unidades | Por unidad | Por Tubo* |
50 - 50 | 1,67 € | 83,50 € |
100 - 450 | 1,43 € | 71,50 € |
500 + | 1,171 € | 58,55 € |
*precio indicativo |
- Código RS:
- 178-4330
- Nº ref. fabric.:
- NCP1076ABP100G
- Fabricante:
- onsemi
Documentación Técnica
Legislación y Conformidad
- COO (País de Origen):
- CN
Datos del Producto
The NCP1076A & NCP1076B products integrate a fixed frequency current mode controller with a 700 V MOSFET. Available in a two different pin out of the very common PDIP 7 package, it offers a high level of integration, including soft start, frequency jittering, short circuit protection, skip cycle, a maximum peak current set point, ramp compensation, and a dynamic self supply (DSS, eliminating the need for an auxiliary winding).
Up to 30W output SMPS design capability
Ability to scale for efficiency or size
Adjust output current protection based on output power demand
Eliminate acoustic noise
Eliminate Aux winding
Provides more robust protection without worrying about the coupling of the aux winding
Improved efficiency at light load / Improved EMI over the entire load
<50mW no Load Power Consumption
Better EMI Signature Over the Entire Operating Range
Enhanced Protection Against too Low or too High Input Voltage
Ability to scale for efficiency or size
Adjust output current protection based on output power demand
Eliminate acoustic noise
Eliminate Aux winding
Provides more robust protection without worrying about the coupling of the aux winding
Improved efficiency at light load / Improved EMI over the entire load
<50mW no Load Power Consumption
Better EMI Signature Over the Entire Operating Range
Enhanced Protection Against too Low or too High Input Voltage
Especificaciones
Atributo | Valor |
---|---|
Tensión Máxima de Entrada | 10 V |
Tipo de Montaje | Montaje en orificio pasante |
Conteo de Pines | 7 |
Dimensiones | 10.16 x 7.11 x 4.95mm |
Corriente de Salida Máxima | 650mA |
Tipo de Encapsulado | PDIP |
Rango de Tensión de Entrada | -0,3 → 10 V |
Tensión de Entrada Mínima | -0,3 V |
Temperatura Máxima de Funcionamiento | +150 °C |
Longitud | 10.16mm |
Ancho | 7.11mm |
Altura | 4.95mm |
Rango de Temperatura de Funcionamiento | Máximo de +150 °C |
Rango de Corriente de Salida | 650 mA |
Enlaces relacionados
- Convertidor ac-dc VIPER17LN 7 pines
- Convertidor ac-dc VIPER27HN 7 pines
- Convertidor ac-dc NCP1079BBP130G 7 pines 1.05A
- Convertidor ac-dc LNK3205P 7 pines 175 (MDCM) mA, 270 (CCM) mA
- Convertidor ac-dc LNK3696P 8 pines
- Convertidor ac-dc LNK3206P 7 pines 225 (MDCM) mA, 360 (CCM) mA
- Convertidor ac-dc NCP1075BBP130G 7 pines 400mA
- Convertidor ac-dc NCP1077BBP130G 7 pines 800mA