- Código RS:
- 180-8432
- Nº ref. fabric.:
- 2030866
- Fabricante:
- Lenox
Actualmente no es posible confirmar la disponibilidad de stock online. Por favor, espere unos minutos o contacte con nosotros
Añadido
Precio Unidad
27,03 €
(exc. IVA)
32,71 €
(inc.IVA)
Unidades | Por unidad |
1 + | 27,03 € |
- Código RS:
- 180-8432
- Nº ref. fabric.:
- 2030866
- Fabricante:
- Lenox
Documentación Técnica
Legislación y Conformidad
- COO (País de Origen):
- KR
Datos del Producto
1,000+ CUTS:
METALMAX™ delivers 1,000 or more cuts with no need for wheel changes. That is 30 times longer life than thin bonded cut-off wheels.*
LONG LIFE:
Advanced diamond technology provides extreme durability in metal cutting applications, leading to increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cut-off wheels.
DIAMETER RETENTION:
Because LENOX METALMAX™ is made with diamonds, it doesn't get smaller. The cutting depth stays the same throughout its life, meaning better control, reach and precision.
LESS DUST RESIDUE:
With LENOX METALMAX™ there is less odor and dust residue as the wheel does not wear down like bonded abrasives. Sparks originate only from the material being cut.
ONE WHEEL, MULTIPLE MATERIALS:
LENOX METALMAX™ is recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminum** and non-ferrous metals.
LENOX METALMAX™ is designed for use in the same power tools as bonded abrasive wheels, at the same RPMs and feed forces. No changes in operating settings are required. Use LENOX METALMAX™ as you would a bonded abrasive wheel.
METALMAX™ delivers 1,000 or more cuts with no need for wheel changes. That is 30 times longer life than thin bonded cut-off wheels.*
LONG LIFE:
Advanced diamond technology provides extreme durability in metal cutting applications, leading to increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cut-off wheels.
DIAMETER RETENTION:
Because LENOX METALMAX™ is made with diamonds, it doesn't get smaller. The cutting depth stays the same throughout its life, meaning better control, reach and precision.
LESS DUST RESIDUE:
With LENOX METALMAX™ there is less odor and dust residue as the wheel does not wear down like bonded abrasives. Sparks originate only from the material being cut.
ONE WHEEL, MULTIPLE MATERIALS:
LENOX METALMAX™ is recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminum** and non-ferrous metals.
LENOX METALMAX™ is designed for use in the same power tools as bonded abrasive wheels, at the same RPMs and feed forces. No changes in operating settings are required. Use LENOX METALMAX™ as you would a bonded abrasive wheel.
Especificaciones
Atributo | Valor |
---|---|
Diámetro de Disco | 125mm |
Tipo de disco | Disco de corte |
Grosor | 1.3mm |
Material Abrasivo | Óxido de Aluminio |
Tamaño de Arena | P120 |
Grado | Fino |
Velocidad Máxima de Seguridad | 12250rpm |
Forma del disco | Redondo |
Enlaces relacionados
- Disco de corte Fino de Óxido de Aluminio RS PRO Ø 75mm x 1mm
- Disco de desbaste Fino de Óxido de Aluminio 3M Ø 150mm
- Disco de esmerilado Muy Fino de Óxido de Aluminio 3M diám. 125mm x...
- Disco de láminas Fino de Aluminio de Zirconio 3M Ø 125mm
- Disco de corte Fino de Óxido de Aluminio 3M diám. 125mm x 1mm, RPM...
- Disco de láminas Fino de Óxido de zirconio Norton Ø 115mm, RPM...
- Disco de desbaste Fino de Óxido de Aluminio Bosch Ø 115mm
- Disco de desbaste Fino de Óxido de Aluminio 3M Ø 125mm