Disco de corte Medio de Óxido de Aluminio Lenox, P80, Ø 357mm x 3.3mm, RPM máx. 4400rpm
- Código RS:
- 180-8434
- Nº ref. fabric.:
- 2030942
- Fabricante:
- Lenox
2 Disponible para entrega en 4 día(s) laborable(s).
Precio Unidad
210,54 €
(exc. IVA)
254,75 €
(inc.IVA)
Unidades | Por unidad |
---|---|
1 + | 210,54 € |
- Código RS:
- 180-8434
- Nº ref. fabric.:
- 2030942
- Fabricante:
- Lenox
Documentación Técnica
Legislación y Conformidad
- COO (País de Origen):
- KR
Datos del Producto
1,000+ CUTS:
METALMAX™ delivers 1,000 or more cuts with no need for wheel changes. That is 30 times longer life than thin bonded cut-off wheels.*
LONG LIFE:
Advanced diamond technology provides extreme durability in metal cutting applications, leading to increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cut-off wheels.
DIAMETER RETENTION:
Because LENOX METALMAX™ is made with diamonds, it doesn't get smaller. The cutting depth stays the same throughout its life, meaning better control, reach and precision.
LESS DUST RESIDUE:
With LENOX METALMAX™ there is less odor and dust residue as the wheel does not wear down like bonded abrasives. Sparks originate only from the material being cut.
ONE WHEEL, MULTIPLE MATERIALS:
LENOX METALMAX™ is recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminum** and non-ferrous metals.
LENOX METALMAX™ is designed for use in the same power tools as bonded abrasive wheels, at the same RPMs and feed forces. No changes in operating settings are required. Use LENOX METALMAX™ as you would a bonded abrasive wheel.
METALMAX™ delivers 1,000 or more cuts with no need for wheel changes. That is 30 times longer life than thin bonded cut-off wheels.*
LONG LIFE:
Advanced diamond technology provides extreme durability in metal cutting applications, leading to increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cut-off wheels.
DIAMETER RETENTION:
Because LENOX METALMAX™ is made with diamonds, it doesn't get smaller. The cutting depth stays the same throughout its life, meaning better control, reach and precision.
LESS DUST RESIDUE:
With LENOX METALMAX™ there is less odor and dust residue as the wheel does not wear down like bonded abrasives. Sparks originate only from the material being cut.
ONE WHEEL, MULTIPLE MATERIALS:
LENOX METALMAX™ is recommended for multiple types of metal including steel, sheet metal, stainless steel, rebar, cast iron, aluminum** and non-ferrous metals.
LENOX METALMAX™ is designed for use in the same power tools as bonded abrasive wheels, at the same RPMs and feed forces. No changes in operating settings are required. Use LENOX METALMAX™ as you would a bonded abrasive wheel.
Especificaciones
Atributo | Valor |
---|---|
Tipo de disco | Disco de corte |
Diámetro de Disco | 357mm |
Grosor | 3.3mm |
Material Abrasivo | Óxido de Aluminio |
Tamaño de Arena | P80 |
Número en Pack | 1 |
Grado | Medio |
Velocidad Máxima de Seguridad | 4400rpm |
Forma del disco | Redondo |
Enlaces relacionados
- Disco de corte Medio de Óxido de Aluminio Lenox, P80, Ø 115mm x...
- Disco de corte Fino de Cerámica Sidamo, P120, Ø 355mm x 2.8mm, RPM...
- Disco de corte Medio de Óxido de Aluminio Lenox, P60, Ø 230mm x...
- Disco de corte Fino de Óxido de Aluminio Lenox, P120, Ø 125mm x...
- Disco de corte Bosch, Ø 125mm x 1mm, RPM máx. 80m/s
- Disco de corte Medio de Óxido de Aluminio Dremel, P60, Ø 38mm x...
- Disco de corte Bosch, Ø 115mm x 1.6mm, RPM máx. 80m/s
- Disco de corte Norton, Ø 115mm, RPM máx. 80m/s