Lámina de apantallamiento M4(300)-185X70T0800, Base de polímero combinada con micropartículas, Fijación con ,
- Código RS:
- 181-5899
- Nº ref. fabric.:
- M4(300)-185X70T0800
- Fabricante:
- KEMET
Producto Descatalogado
- Código RS:
- 181-5899
- Nº ref. fabric.:
- M4(300)-185X70T0800
- Fabricante:
- KEMET
Documentación Técnica
Legislación y Conformidad
- COO (País de Origen):
- JP
Datos del Producto
The KEMET Magnetic Sheet for radio frequency identification (RFID) Flex Suppressor® prevents interference between a loop antenna and metallic objects and effectively improves the communication rage of RFID. The flexible sheet is a polymer base, blended with micronsized magnetic powders dispersed throughout the material. These sheets improve the magnetic flux convergence and can be cut into a variety of shapes and sizes.
Magnetic flux convergence improvement - increases the relative permeability (u) while keeping the magnetic loss(u) low Effective carrier frequency 13.56 MHz and below
Resistant to shock, not brittle
Thin, flexible material used in portable equipment
Virtually no limitation in where it can be used
Less time required for installation
Easily cut into any shape
Easily laminates the Flex Suppressor® roll to the tag roll
Halogen-free
Resistant to shock, not brittle
Thin, flexible material used in portable equipment
Virtually no limitation in where it can be used
Less time required for installation
Easily cut into any shape
Easily laminates the Flex Suppressor® roll to the tag roll
Halogen-free
Especificaciones
Atributo | Valor |
---|---|
Material | Base de polímero combinada con micropartículas |
Método de Fijación | Autoadhesiva |
Serie | M4 |
Grosor | 0.3mm |
Longitud | 185mm |
Anchura | 70mm |
Rango de Temperatura de Funcionamiento | -40 → +105 °C |
Mínima Temperatura de Funcionamiento | -40°C |
Máxima Temperatura de Funcionamiento | +105°C |
Frecuencia pico | 13.56MHZ |