Pinza amperimétrica Fluke, calibrado RS

Pinza amperimétrica de ac/dc para ampliar los rangos de medición de medidores y osciloscopios Fluke SCOPE

Test the electrical performance of your wiring using this current clamp from FLUKE. It works together with a multimeter to measure the AC and DC running through a cable. The jaw capacity of 12.5mm gives you plenty of room to reach around large cable bundles. As it's powered by a 9V battery, there's no need to connect it to a power source, giving you flexibility when taking measurements on the go.

• Robust battery life of 55 hours for long-lasting use
• Cable length of 1.6m for a long-range connection to your testing device

• Automotive engineering
• Assembly plants
• HVAC systems
• DIY repairs

Thanks to its broad measurement range between 0.1 and 100A for DC power and 0.1 and 70A for AC power, you can use this clamp to test both low-current and high-current setups.

It has a working voltage of up to 600V AC, so it's a safe bet for demanding electrical systems.

"¡Vuelve la promoción Compre un Fluke y reciba otro GRATIS!".
Entre el 1 de marzo de 2024 y el 31 de agosto de 2024, el cliente gasta 150 € o más en un producto Fluke que cumpla los requisitos (Fluke Industrial, Fluke Calibration, Fluke Networks o Beha-Amprobe).
El cliente podrá solicitar su instrumento de Fluke a través de: www.fluke.es/freefluke
Será necesario presentar una prueba de compra en forma de recibo o factura.