Registrador de datos RS PRO Temperatura con alarma AA USB Calibración UKAS

Documentación Técnica
Legislación y Conformidad
Certificado de conformidad RoHS
COO (País de Origen): CN
Datos del Producto

RS PRO USB Temperature Data Logger

Introducing the latest generation data logger from RS PRO designed as a Temperature sensor. This high-quality standalone data logger measures and stores over 16,000 temperature readings from -35 to +80°C (-31 to +176°F) . The logger is protected against ingress from water and dust to IP67 standard when the cap is fitted so can be safely used both inside and outside.

You can easily set up the logger and view downloaded data by plugging the data logger into a PC’s USB port and using the free software. Data can be printed and exported to other applications for detailed analysis.

This model also features RS calibration

Features and benefits:

• -35 to +80°C (-31 to +176°F) measurement range
• Stores over 16,000 readings for both temperature and humidity
• Software available as a free download
• Logging rates between 10 seconds and 12 hours
• Immediate and delayed logging start
• User-programmable alarm thresholds
• Status indication via red/green LEDs
• Environmental protection to IP67
• Software available as a free download (please, see below)

EasyLog software:

Easy to install and use, the control software is compatible with 32-bit and 64-bit versions of Windows 7, 8 and 10. The software is used to set up the logger, download, graph and annotate data or export in Excel, PDF and jpeg formats.

The software allows the following parameters to be configured:

• Logger name
• Measurement parameter (°C or °F)
• Logging rate (user selectable between 10 seconds and 12 hours)
• High and low alarms
• Immediate and delayed logging start

Please see the following link for free EasyLog software -

Typical Applications:

-35 a +80 °C (-31 a +176 °F)
Escala de medida
Almacena más de 16.000 lecturas
Alarmas programables por el usuario

Is the battery supplied?

Yes, the RS PRO Data Logger is supplied as a complete ready-to-use device with the battery and all necessary accessories.

How long will the battery last in my data logger?

The battery life depends on your logger's settings but it should last approximately 2 years (at 25°C and 1-minute logging rate).

Why do the LEDs flash after connecting my logger to a PC?

If the LEDs flash sequentially it may indicate that there is a problem with the battery. This could be a flat battery or a battery where a passivation layer has formed. Leaving the data logger connected to a PC for about 30 seconds and re-installing the batteries to reset the data logger will solve the issue.

If you see the sequential LEDs after disconnecting the logger from a PC then the logging session will not start. You should check the battery condition and then repeat the setup procedure using the PC software.

What else is in the set?

The full set contains the logger, battery and a wall mount clip for easy installation.

Suministrado con

1/2 AA battery and wall mount clip.

Atributo Valor
Parámetros de Medición Temperatura
Tipo de Sensor Temperatura
Medición de Temperatura Máxima +80 °C, +176 °F
Potencia de la Fuente Batería
Precisión Máxima de Medición de Temperatura ±1 °C
Clasificación IP IP67
Calibrado UKAS
Temperatura Mínima de Funcionamiento -35°C
Temperatura Máxima de Funcionamiento +80°C
Dimensiones 99 x 25 x 23mm
Número de Lecturas por Canal 16000
Duración de Batería 2 años
Incluye Batería
Tipo de Batería AA
Temporalmente fuera de stock. El producto se entregará cuando vuelva a estar disponible.
Precio Unidad
(exc. IVA)
Por unidad
1 +
166,10 €