Adhesivo acrílico ITW Devcon Devweld 530 de color Blanco, Cartucho doble de 50 ml, curado en 24 h.

The ITW Devcon 50ml acrylic adhesive is a 2-part structural paste and dispensing system which allows the metering, mixing and accurate application of epoxy and acrylic structural adhesive. It ensures accurate ratio mix, fast application with a predetermined flow rate and reduced waste/mess. It is made of methacrylate. To apply the adhesive, a system of a 1:1 ratio cartridge (in 3 sizes) application gun and static mixing nozzle is required, each is available separately.

• Rapid curing structural adhesive that produces high strength load-bearing bonds
• Minimal surface preparation
• Excellent shear, peel and impact-resistant strength
• Resistant to weathering, moisture and wide variations in temperature
• Substrates -Engineered plastics, metal ceramics and many other materials
• Working time of 4 to 6 minutes
• Fixture time of 12 to 15 minutes
• Cure time of 24 hours
• Viscosity of 40000 to 60000cP/s
• The operating temperature ranges between -55°C and 120°C

• Composite
• Metal
• Plastic