Conector de backplane Amphenol Communications Solutions, Serie Metral, paso 2.0mm, 48 vías, 4 filas, Ángulo de 90° ,
- Código RS:
- 182-2199
- Nº ref. fabric.:
- 88946-112LF
- Fabricante:
- Amphenol Communications Solutions
Ver todo Conectores para Backplane
Temporalmente fuera de stock. El producto se entregará cuando vuelva a estar disponible.
Precio unitario (En un Tubo de 960)
4,526 €
(exc. IVA)
5,476 €
(inc.IVA)
unidades | Por unidad | Por Tubo* |
960 + | 4,526 € | 4.344,96 € |
*precio indicativo |
- Código RS:
- 182-2199
- Nº ref. fabric.:
- 88946-112LF
- Fabricante:
- Amphenol Communications Solutions
Documentación Técnica
Legislación y Conformidad
- COO (País de Origen):
- IN
Datos del Producto
Modular and scalable, available in 1, 2, 4 and 8 modules
250 contacts per 100 mm connector length
Press-fit, Solder-to-Board and Pin-in-Paste terminations
Varying pin length enables first-mate, last-break capability
4 and 5 row versions available
Different length contacts at any position for Headers
Dual beam contact design for receptacles
Locating pegs option available
Stackable connector to Metral® high speed range
Flexible modular length without any loss of contact position
High signal density
Caters to different application requirement
Allows sequential connection of pins for design flexibility and offers protection
Caters to different connector sizes
Custom loading
Provides electrical reliability and withstands vibration
Enables accurate positioning of connector on PCB, holds connector in place
Allows flexibility of low and high speed signals
250 contacts per 100 mm connector length
Press-fit, Solder-to-Board and Pin-in-Paste terminations
Varying pin length enables first-mate, last-break capability
4 and 5 row versions available
Different length contacts at any position for Headers
Dual beam contact design for receptacles
Locating pegs option available
Stackable connector to Metral® high speed range
Flexible modular length without any loss of contact position
High signal density
Caters to different application requirement
Allows sequential connection of pins for design flexibility and offers protection
Caters to different connector sizes
Custom loading
Provides electrical reliability and withstands vibration
Enables accurate positioning of connector on PCB, holds connector in place
Allows flexibility of low and high speed signals
Metral® Board Connectors, Backplane Connectors, 4 Row Signal Receptacle, Right Angle, Press-Fit.
Especificaciones
Atributo | Valor |
Número de Contactos | 48 |
Número de Filas | 4 |
Orientación del Cuerpo | Ángulo de 90° |
Paso | 2.0mm |
Tipo de Montaje | Orificio Pasante |
Material del Contacto | Aleación de Cobre |
Revestimiento del Contacto | Oro |
Valor Nominal de Corriente | 1.5A |
Tensión Nominal | 1,0 kV |
Método de Terminación | Encaje a presión |
Serie | Metral |
Número de serie | 88946 |