- Código RS:
- 244-2897
- Nº ref. fabric.:
- TLE94613ESXUMA1
- Fabricante:
- Infineon
Temporalmente fuera de stock. Disponible a partir del 05/05/2025, con entrega en 4 día(s) laborable(s).
Añadido
Precio unitario (Suministrado en Carretes de 3000)
1,624 €
(exc. IVA)
1,965 €
(inc.IVA)
Unidades | Por unidad | Por Carrete* |
3000 + | 1,624 € | 4.872,00 € |
*precio indicativo |
- Código RS:
- 244-2897
- Nº ref. fabric.:
- TLE94613ESXUMA1
- Fabricante:
- Infineon
Documentación Técnica
Legislación y Conformidad
Datos del Producto
The Infineon TLE94613ESXUMA1 device is designed for various CAN automotive applications as main supply for the microcontroller and as interface for a CAN bus network including the CAN Partial Networking feature. To support these applications, the System Basis Chip (SBC) provides the main functions, such as a 5 V lowdropout voltage regulator (LDO) for e.g. a microcontroller supply, another 5 V low-dropout voltage regulator with off-board protection for e.g. sensor supply, a HS-CAN transceiver supporting CAN FD and CAN Partial Networking (incl. FD tolerant mode) for data transmission, a high-voltage GPIO with embedded protective functions and a 16-bit Serial Peripheral Interface (SPI) to control and monitor the device.
Fully compliant to Hardware Requirements for LIN, CAN and FlexRay Interfaces in Automotive Applications Revision 1.3, 2012-05-04
Charge pump-Output for N-channel MOSFET reverse-polarity protection with integrated spread spectrum modulation feature for optimum EMC performance
Universal High-Voltage Wake Input for voltage level monitoring and wake detection
General Purpose High-Voltage In- and Output (GPIO) configurable as Fail Output, Wake Input, Low-Side switch or High-Side switch
HIgh-Voltage Measurement Function as alternate pin assignment
Fail Outputs for Fail-Safe signalization
Configurable wake-up sources
Reset Output & Interrupt Output
Charge pump-Output for N-channel MOSFET reverse-polarity protection with integrated spread spectrum modulation feature for optimum EMC performance
Universal High-Voltage Wake Input for voltage level monitoring and wake detection
General Purpose High-Voltage In- and Output (GPIO) configurable as Fail Output, Wake Input, Low-Side switch or High-Side switch
HIgh-Voltage Measurement Function as alternate pin assignment
Fail Outputs for Fail-Safe signalization
Configurable wake-up sources
Reset Output & Interrupt Output
Especificaciones
Atributo | Valor |
---|---|
Aplicación | Automoción |
Tipo de Encapsulado | TSDSO-24 |
Enlaces relacionados
- System-On-Chip Infineon CY8C29466-24SXI Detección capacitiva
- System-On-Chip Infineon CY8C4124LQI-443 Detección capacitiva
- System-On-Chip Infineon CY8C21634-24LTXI Detección capacitiva
- System-On-Chip Infineon CY8C23533-24LQXI Detección capacitiva
- System-On-Chip Infineon CY8C5868AXI-LP035 Detección capacitiva
- System-On-Chip Infineon CY8C4245AXI-483 Detección capacitiva
- System-On-Chip Infineon TLE9471ESXUMA1 TSDSO-24
- System-On-Chip Infineon TLE94713ESXUMA1 TSDSO-24